Brooks Instrument GT 1305, Инструкция по установке и эксплуатации

Страница: 2 / 20

Installation and Operation Manual
X-VA-1305-1306-eng-eu
PN 541-C-029-AAG
April, 2008
Models GT 1305 & 1306
22
GLASS TUBE EXPLOSION HAZARD
Plastic protective sleeve must remain over glass
tube. Fasten meter windows securely.
Do not operate above pressure and temperature
limits. Avoid pressure and flow surges.
Do not service or repair while pressurized.
Read and understand instruction manual.
Failure to comply could result in serious
personal injury or property damage.
Warning Model 1306 Warning Model 1305
Do not operate this instrument in excess of
the specifications listed below. Failure to heed
this warning can result in serious personal injury
and/or damage to the equipment.
Essential Instructions
Read this page before proceeding!
Brooks Instrument designs, manufactures and tests its products to meet many national and international standards.
Because these instruments are sophisticated technical products, you must properly install, use and maintain them to
ensure they continue to operate within their normal specifications. The following instructions must be adhered to and
integrated into your safety program when installing, using and maintaining Brooks Products.
•
Read all instructions prior to installing, operating and servicing the product. If this instruction manual is not
the correct manual, please see back cover for local sales office contact information. Save this instruction
manual for future reference.
• If you do not understand any of the instructions, contact your Brooks Instrument representative for clarification.
• Follow all warnings, cautions and instructions marked on and supplied with the product.
• Inform and educate your personnel in the proper installation, operation and maintenance of the product.
• Install your equipment as specified in the installation instructions of the appropriate instruction manual and
per applicable local and national codes. Connect all products to the proper electrical and pressure sources.
• To ensure proper performance, use qualified personnel to install, operate, update, program and maintain
the product.
• When replacement parts are required, ensure that qualified people use replacement parts specified by
Brooks Instrument. Unauthorized parts and procedures can affect the product's performance and place
the safe operation of your process at risk. Look-alike substitutions may result in fire, electrical hazards or
improper operation.
• Ensure that all equipment doors are closed and protective covers are in place, except when maintenance
is being performed by qualified persons, to prevent electrical shock and personal injury.
Pressure Equipment Directive (PED)
All pressure equipment with an internal pressure greater than 0.5 bar (g) and a size larger than 25mm or
1" (inch) falls under the Pressure Equipment Directive (PED). The Directive is applicable within the European
Economic Area (EU plus Norway, Iceland and Liechtenstein). Pressure equipment can be traded freely within
this area once the PED has been complied with.
•
Section 1 of this manual contains important safety and operating instructions related to the PED directive.
• Meters described in this manual are in compliance with EN directive 97/23/EC module H Conformity
Assessment .
• All Brooks Instrument Flowmeters fall under fluid group 1.
• Meters larger than 25mm or 1" (inch) are in compliance with category I, II, III of PED. • Meters of 25mm or
1" (inch) or smaller are Sound Engineering Practice (SEP).