Brooks Instrument GT 1305, Инструкция по установке и эксплуатации

Страница: 17 / 20

Installation and Operation Manual
X-VA-1305-1306-eng-eu
PN 541-C-029-AAG
April, 2008
Models GT 1305 & 1306
17
Section 7:
Model listing/ordering information
How to order:
Please describe: 1 Model Number
2 Quantity required
3 Minimum, normal and maximum flow rate
4 Process fluid, density and viscosity at operating conditions
5 Minimum, normal and maximum operating temperature and pressure
6 Scale inscription
7 Accessories required, i.e. flow controller
BASE MODEL NO. DESCRIPTION
1305/A O-ring seal flowmeter, scale length 75 mm
1306/B O-ring seal flowmeter, scale length 127 mm
CODE TUBE TYPE
* To be selected from the flow range table
CODE FLOAT TYPE
* To be selected from the flow range table
CODE FITTING MATERIAL
1 Brass
2 316 SS
CODE O-RING MATERIAL
1 Viton
2 Buna
3 Kalrez
CODE CONNECTION TYPE
1 NPT
2 BSP
CODE SCALE TYPE
A mm Decal + cal. curve, Class 6 (GT 1305 only)
B mm Decal + cal. curve, Class 4 (GT 1305 only)
C mm Decal + cal. curve, Class 2.5 (GT 1306 only)
D mm Decal + cal. curve, Class 1.6 (GT 1306 only)
E % Decal + factor, Class 6 (GT 1305 only)
F % Scale + factor, Class 4 (GT 1305 only)
G % Decal + factor, Class 2.5 (GT 1306 only)
H % Scale + factor, Class 1.6 (GT 1306 only)
J DR scale, Class 6 (GT 1305 only)
K DR scale, Class 4 (GT 1305 only)
L DR scale, Class 2.5 (GT 1306 only)
M DR scale, Class 1.6 (GT 1306 only)
CODE PANEL MOUNTING
1 Long screws for front panel mounting
2 Long screws for back panel mounting
CODE VALVE
A ½” Brass needle valve on inlet
B ½” 316 SS needle valve on inlet
C 1” Brass needle valve on inlet
D 1” 316 SS needle valve on inlet
E ½” Brass needle valve on outlet
F ½” 316 SS needle valve on outlet
G 1” Brass needle valve on outlet
H 1” 316 SS needle valve on outlet
1305/A * * 1 1 1 A 1 A Typical model number
Section 7 Model listing/ordering information