3-9
Brooks
®
Models 0152/0154
Section 3 Operation
Installation and Operation Manual
X-SE-0152-0154-eng
Part Number: 541C052AAG
March, 2008
Full Scale Values
The Full Scale Flow range is always 100.0 in case of using the default “%”
as engineering unit. The Full Scale Value can not be changed in this case.
When using any other engineering unit, the full scale flow range can be
changed. This can be done via the menu selection “Full Scale Values”
resulting in the following screen:
It is possible to enter a full scale value from 0.000 minimum to 99999.999
as a maximum.
Display Format
As shown in the Full Scale Value screen, it is possible to change the
amount of decimal places on the display. This can be done in the menu
selection “Display format”. When activated the following screen appears:
By using the up and down key the amount of decimal places can be
changed from zero decimal places to a maximum of three decimal places.
Using “channel selection” the other channels can be changed. After a
confirmation of the changes with “Enter”, the display returns to the flow
information screen using the updated display format.
NOTE:
The accuracy of the Read-out & Control Electronics is 0.1% of max. flow
value. For example if a full scale value of 950 is entered, it is not useful to
have a decimal place.
