3-1
Brooks
®
Models 0152/0154
Section 3 Operation
Installation and Operation Manual
X-SE-0152-0154-eng
Part Number: 541C052AAG
March, 2008
3-1 General
The read-out function of the Models 0152 and 0154 and the controlling of
the Mass Flow Controllers / Meters are designed for fast and easy usage.
Basically, the flow output signals are shown on the display in percentage or
in your own engineering units (full scale value and flow parameters can be
adjusted per channel).
Changing a value via the push buttons always has to be confirmed by the
“Enter” key. If the confirmation takes too long after a change of any setting,
the display will return automatically to its flow read-out function. The only
exception to this rule are adjustments in the menu.
3-2 Description of the Keys
Channel Selection
This key allows you to select the active channel for any changes, like
setpoint, blending, remote control or valve control.
Menu
With this key you enter into the menu mode.
Up / Down
In normal operation, the setpoint value can be changed. In menu mode,
different selections can be chosen and in blending mode, the master
channel can be selected with these keys. Fast scrolling through the menus
can be done with the double arrow keys. Slow scrolling can be done with
the single arrow keys.