BRONKHORST FLEXI-FLOW Compact, Инструкция по эксплуатации

Страница: 33 / 37

Bronkhorst®
Instruction Manual FLEXI-FLOW™ Compact 9.17.158A 33
Firmware Version
Type Access Range FlowDDE FLOW-BUS Modbus
Unsigned char[16] R - 105 113/5 0xF128…0xF12A/ 61737…61739
Revision number of the firmware
Identification Number
Type Access Range FlowDDE FLOW-BUS Modbus
Unsigned char RW B 0…255 175 113/12 0x0E2C/3629
Bronkhorst® (digital) device type identification number.
Device Type
Type Access Range FlowDDE FLOW-BUS Modbus
Unsigned char[6] R - 90 113/1 0xF108…0xF10A/ 61705…61707
Device type information string; this parameter contains an abbreviation referring to the identification number.
4.2.9 Operational history
Name Type Access Range FlowDDE FLOW-BUS Modbus*
BHT1: Production Date String RW B 94 118/1 0xF608 [8]
BHT2: Operation Time Unsigned int R 95 118/2 0x0EC2 [1]
BHT3: Flow Time Unsigned long R 96 118/3 0xF618 [2]
BHT4: Actuation Count Unsigned int R
97
118/4
0x0EC4 [1]
BHT5: Mode Change Count Unsigned char R 98 118/5 0x0EC5 [1]
BHT6: Watchdog Reset Count Unsigned char R 99 118/6 0x0EC6 [1]
BHT7: Power Cycle Count Unsigned char R 100 118/7 0x0EC7 [1]
BHT8: Normal Reset Count Unsigned char R 101 118/8 0x0EC8 [1]
BHT9: NVRAM Error Count Unsigned long R 102 118/9 0xF648 [2]
BHT12: NVRAM Write Count Unsigned long R 330 118/12 0xF660 [2]
*) numbers in square brackets denote the number of blocks/registers a parameter occupies
4.2.10 Special parameters
Init Reset
Type Access Range FlowDDE FLOW-BUS Modbus
Unsigned char RW 82/64 7 0/10 0x000A/11
Init Reset is used to unlock secured parameters (marked with a B symbol) for writing. It supports the following values:
Value Description
64 unlocked, secured parameters can be read and written to
82 locked, secured parameters are read-only
At power-up, Init Reset is always set to ‘Locked’ (value 82).