BRONKHORST ES-FLOW, Инструкция по эксплуатации

Страница: 22 / 48

Bronkhorst®
Instruction Manual ES-FLOW™ 9.17.116B 22
The Master slave item is only available if one of the slave control modes is selected. Availability of Master node and Slave factor
depends on the selected mode:
Control mode Master node Slave factor
fb slave
 
analog slave

fb ana slave 
See also Master/slave configuration for more information about setting up a master/slave relationship between
instruments.
3.3.3.3 Counter
Bronkhorst® flow meters have a built-in counter function, which can be used to monitor and/or control the amount of
media flowing through the instrument. The flow can be stopped or changed when a certain limit is reached. Until the
counter is reset, the counter setpoint overrules the regular setpoint.
In the Counter sub menu, the following parameters can be edited:
Parameter Description Supported values
Mode Selected counter mode
·
off
·
up to limit
·
up
Reset Reset method
·
automatic
·
manual
Limit Counter limit or batch size Setpoint range
Setpoint change Specifies whether or not to change the setpoint after
reaching the counter limit
·
yes
·
no
Setpoint New setpoint after reaching counter limit (until counter
reset)
Setpoint range
3.3.3.4 Alarm