brondell Swash SE600, Руководство пользователя

Страница: 16 / 90

14
2. Mount Remote (optional)
a. Identify a location in the bathroom for the remote control that
is visible and reachable from the toilet.
b. Use the provided double-stick tape on the back of the remote
wall mount. Make sure the remote mount is fully secure so that
it does not fall and damage the remote control.
c. Slide the remote control into the mount.
Step 2b
double-stick
tape
(on back)
Step 1b
1. Battery Installation*
a. Remove the Remote Control from the Wall Mount.
b. Turn remote over and remove the battery compartment. Insert
the two included AAA batteries and replace battery cover.
c. To confirm the batteries are installed correctly, press and
release the DRY button. One of the center vertical LED lights
will illuminate for twenty seconds.
* IMPORTANT BATTERY INFORMATION
• Always purchase the correct size and grade of battery most
suitable for the intended use.
• Clean the battery contacts and also those of the device prior to
battery installation.
• Remove batteries from equipment which is not to be used for an
extended period of time.
• Remove batteries if consumed or if product is to be left unused for
a long time.
PRODUCT INSTALLATION
Remote Control Installation