Broncolor Minicom 160, Руководство по эксплуатации

Страница: 8 / 25

9
1. Application Minicom
This mains supplied studio flash unit is designed for professional photography only. In
countries with earthed mains systems, use a three-wire extension cable when required.
a. StaSt up
a.1 Mains Qoltage
Minicom 40e Minicom 80
The monolights Minicom 40 and Minicom 80 are available in two different versions:
a) As a bi-voltage-unit, of which the technical data are optimised for 200 - 240 V mains
voltage. If this version is operated with 120 V or 100 V mains voltage, the following
restrictions result:
Mains voltage 120 V: doubling of the charging time
Mains voltage 100 V: doubling of the charging time as well as a reduction of the
maximum flash energy to 250 J (Minicom 40) respectively
500 J (Minicom 80). Extension of the flash duration by 20 %.
b) As a bi-voltage-unit, of which the technical data are optimised for 120 V mains voltage.
If this version is operated with a mains voltage of 200 - 240 V or 100 V, the following
restrictions result:
Mains voltage 230 V: doubling of the charging time
Mains voltage 100 V: extension of the charging time by 20 % as well as a reduction
of the maximum flash energy to 250 J (Minicom 40)
respectively 500 J (Minicom 80). Extension of the flash
duration by 20 %.
Minicom 160
The monolight Minicom 160 is only available as a bi-voltage unit with the technical data
optimised for 200 - 240 V mains voltage. When this version is operated with 120 V or
100 V mains voltage, the following restrictions result:
Mains voltage 120 V:
doubling of the charging time
Mains voltage 100 V: doubling of the charging time as well as reduction of the flash
energy to 900 J. Extension of the flash duration.
Attention: The operating voltage of the modelling lamp must correspond to the mains
voltage.
a.a DaSthed mains
Connect unit to current supply always using an earthed mains plug.