background image

2

3

www.bromicheating.com

www.bromicheating.com

!

IMPORTANT

This manual contains important information about the installation, operation, and maintenance 

of Tungsten Smart-Heat™ Electric Heaters. Please pay close attention to the important safety 

information shown throughout this instruction manual. Any safety information will be accompanied 

by the following safety alert symbols:

DANGER,        WARNING,        IMPORTANT

•  READ THIS MANUAL CAREFULLY before installing or 

servicing this product.

•  Improper installation, operation, or maintenance can result in 

death, severe injury, or property damage. 

•  This appliance is intended for fixed installation with 220-

240Volt power supply.

•  Installation MUST be carried out by a licensed and authorised 

technician in accordance with local electrical codes.

•  Patent Pending & Australian Registered Design 338721

!

!

!

CONTENTS

IMPORTANT NOTES & WARNINGS

4

PRODUCT OVERVIEW

5

PRODUCT DESCRIPTION AND FEATURES

5

SPECIFICATIONS

5

HEATER INSTALLATION

6

REMOVE PACKAGING MATERIAL

6

INSTALLATION CLEARANCES

7

CEILING WALL MOUNTING

8

CHAIN SUSPENSION

8

TUBE SUSPENSION

9

ELECTRICAL INSTALLATION

10

WIRING DIAGRAMS

11

SERVICING

12

MAINTENANCE

12

TUBE ELEMENT REPLACEMENT

12

REPLACEMENT PART LIST

13

TROUBLESHOOTING

13

BROMIC HEATING 

Head Office: 

1 Suttor Street, Silverwater, Sydney, NSW 2128 Australia    

Telephone:

 1300 276 642 (within Australia) or +61 2 9748 3900 (from overseas)  

Fax:

 +61 2 9748 4289   

Email:

 [email protected]   

Web:

 www.bromicheating.com 

Note:  Bromic Heating reserves the right to make changes to specifications, parts, components and equipment without prior notification. 

This Installation, operation and service manual may not be reproduced in any form with prior written consent from Bromic Heating. 

Correct Disposal of this product

This marking indicates that this product should not 
be disposed with other household wastes throughout 
the EU. To prevent possible harm to the environment 
or human health from uncontrolled waste disposal, 
recycle it responsibly to promote the sustainable reuse 
of material resources. To return your used device, 
please use the return and collection systems or contact 
the retailer where the product was purchased. They 
can take this product for environmental safe recycling.

Содержание Tungsten 2000W








Отзывы: