To attach wheel assembly:
1) Ensure you have the
shoulder bolt, Caster wheel
and nut.
2) Set the wheel into the
caster body and place the bolt
through the caster body and
wheel.
3) Secure bolt with the nut
provided.
Heavy Duty Caster:
1) Jack capacity limited to
lesser of jack or caster.
2) Use 4 3/8” bolts, washers,
and locknuts as shown.
To attach a handle assembly:
1) Insert the long bolt through
handle.
2) Align flat on bolt with flat in
crank arm hole.
3) Tighten locknut to secure
crank arm to the handle.
bROK Products LLC 2840 Gilchrist RD – 14B Akron OH 44305
4
Top-wind handle assembly:
1) Place the washer between
handle and screw step at top
of jack.
2) Assemble the bolt through
the handle and the screw step.
3) Attach locknut to bolt and
tighten securely.
Shoulder Bolt
Rev A
