Serious injury or death may result from the use of this
product. Exercise extreme caution when using these Jacks.
•
User must ensure product is installed according to these
instructions. Purchaser, owner or user must not alter or
modify the product.
Serious injury or death may result to operator or bystanders.
•
If this product has a pivot tube mount, make certain the
pivot tube pin is fully inserted through both sides of the
pivot tube and the pivot tube mounts.
•
If this product is a swivel jack, Ensure the plunger pin is
locked into a hole on the mounting bracket before
operating the jack.
•
If this product has a snap ring, ensure the snap ring
groove is cleared of any and all debris before and after
attachment of the snap ring. Ensure snap ring is fully
seated into the snap ring groove.
•
Do not weld “Bolt-On” brackets or straps to the tongue.
•
If this product has a drop foot or drop leg, Never attempt
to adjust a drop foot or drop leg when it is under load.
Always remove drop foot or drop leg from product before
towing trailer to maximize ground clearance.
•
If this product is a rack jack, never raise the ger housing
above the inner tube.
•
Always replace any and all bent broken or worn parts on
this product before using this product.
•
These jacks are not designed to be used on a round tube
tongue.
•
All welding must be performed by a certified AWS welder
Serious Injury or death may result to operators and bystanders.
•
Never position any part of the body under any portion of this
product or the load being applied to at any time.
•
Always fully rotate and secure the jack in a fully retracted
manner to ensure complete clearance form the road or road
obstacles before traveling.
•
When using this product to bear the weight of the load
always ensure wheels are fully chocked and trailer and load
are prevented from moving or rolling.
•
This is not a transport device. Minimize any movement of the
trailer or load while this product is engaged with the ground.
•
Do not allow children to play on the jack or the load that it is
applied to.
•
Do not exceed jack capacity. Jack capacity is limited to the
lesser of the foot plate, caster or jack capacity.
•
Never exceed the maximum rated capacity of the jack. Jack
capacity is located on the jack’s decals or stampings.
•
Do not allow excessive side loading of the jack. The jack is
designed for vertical loading only.
•
Lower jack to lowest position before manually moving trailer.
•
Always replace bent broken or worn parts before using this
this product.
The attachment or use of this product is critical and beyond
the control of bROK Products LLC. bROK Products is not
responsible for the use or attachment or installation. bROK
Products neither guarantees nor will it be liable for any
damage resulting from the attachment, use or misuse of the
this product or assembled product. The liability of this product
is limited to its purchased price if it is proved to be the result
of poor workmanship or defective material.
Trailer Jacks:
32908, 32909, 32923, 32924,
32925, 32932 , 15936 Rev A
1
