GSF2818KS/GSF2818KS-2
Instruction Manual
Guide d’utilisation
13
Operating Your Grill
CAUTION:
Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of
unauthorized parts can create an unsafe condition and environment.
The propane gas supply cylinder used must be constructed and marked in accordance with the
Specifications for Propane
Gas Cylinders
of the U.S. Department of Transportation (DOT). Only cylinders with a listed overfill prevention device (OPD)
and marked “propane” may be used. Cylinders with an OPD will have valve handles with three “lobes” (prongs).
Use only the pressure regulator and hose assembly supplied with your propane barbecue. Replacement pressure regulators and
hose assembly must be those specified by the outdoor cooking gas appliance manufacturer. Use only 20-pound cylinders
equipped with a cylinder connection device compatible with the connection for outdoor cooking appliances. The cylinder must
include a collar to protect the cylinder valve. Do not drop or handle the cylinder roughly. When the appliance is not in use,
disconnect the cylinder.
Storage of the appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the appliance. Store
cylinder outdoors and out of the reach of children. Do not store the cylinder in a building, garage or other enclosed areas.
Never store your cylinder where temperatures can reach over 125
℉
.
Before connecting, make sure there are no debris caught in the head of the gas cylinder, regulator valve or in the head of the
burner and burner ports. Connect regulator valve and hand tighten firmly. Disconnect the propane cylinder from the regulator
valve when the grill is not in use. DO NOT obstruct the flow of combustion air or ventilation air to the grill. Ensure the propane
cylinder has a device for vapour withdrawal and equipped with a listed overfill prevention device (OPD).
DANGER:
A fire causing death or serious injury may occur if the following is not followed exactly:
Never store or use gasoline or other volatile substances in the vicinity of this grill.
Never store a spare propane cylinder in the vicinity of this grill, or in the vicinity of another potential heat source.
Never fill the propane cylinder beyond 80% full.
This grill is designed to connect to a standard 20 lb L.P. cylinder only, please refer to the Step 13 of assembly instructions for the
installation.
WARNING:
Don’t store spare gas cylinder in or near grill.
Connecting & Disconnecting The Gas Cylinder
LP (Propane) Gas Supply Connection & Disconnecting
1. Always place the propane cylinder on the tank holder under the cart.
2. Always confirm that all burner control knobs are in the OFF position before opening the gas cylinder valve.
3. Before connection, be sure that there is no debris caught in the head of the gas cylinder, head of
the regulator valve, or in the head of the burner and burner ports.
4. Always connect the gas supply regulators as follows:
Insert the nipple of the valve coupling into the tank valve and tighten the connection collar
by turning it clockwise with one hand while holding the regulator with the other hand.
(See diagram to right.)
5. Disconnect the propane cylinder from the regulator valve when the grill is not in use.
6. Always confirm that all burner control knobs are in the OFF position before disconnecting the gas supply.
7. Before disconnection, be sure that the tank valve is in OFF position.
8. Always disconnect the gas supply regulators as follows:
Loosen the connection collar by turning it anti-clockwise with one hand while holding the regulator with the other hand and
take the nipple of the valve out of the tank valve. (See diagram on the right)
Do not obstruct the flow of combustion air and ventilation air to the grill.
Keep ventilation openings of the cylinder enclosure free and clear from debris.
9. Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Install only the type of dust cap on cylinder valve
outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.
