GPC2700JD
Instruction Manual
Guide d’utilisation
11
Step 10
a) Align the holes on the right side handle (C) with the hole on
the right side shelf (V), and insert one M6 bolt (AA), one M6
flat washer (EE) and one M6 lock washer (DD) into each
pre-drilled hole. Tighten by hand until secure.
b) Loosen the four pre-installed bolts on the right upper frame
(J) and allow 1/4 bolt’s length to extend from right upper
frame.
c) Align the holes on the right side shelf (V) with the bolts
extended from the right upper frame. Push down the right
side shelf until it locks into place.
d) Repeat the procedure for the assembly of left side shelf (W).
e) Go back and tighten all bolts with the screwdriver until
Pre-installed bolt (x 8)
Step 11
a) Put the heating plate (Y) onto the heating plate support.
b) Put the cooking grid (Z) onto the heating plate under 2 clips.
c) Insert the feet of warming rack (AB) into the holes on the top
lid and firebox
Step 12
a) Put the gas tank on the tank seat.
b) Insert the two legs of the tank clip (AC) into the two holes on bottom panel.
c) Clip the tank using the tank clip.
