GPC2700JD
Instruction Manual
Guide d’utilisation
10
Step 7
a) Put the burner (R) inside the firebox. Make certain the valve
nozzle is inserted into the burner venturi tube well.
b) Align the holes on heat insulation (AE) with the holes on the
bottom of firebox.
c) Insert one M6 bolt (BB), one M6 lock washer (DD) and one M6
flat washer (GG) into the pre-drilled holes. Tighten by hand until
secure.
d) Connect the ignition wire with the igniter.
e) Tighten all bolts with the screwdriver until secure.
f)
Hook the grease cup (S) on the hole under firebox.
Step 8
a) Align the holes on the lid handle (U), with the hole on the heat
resistant washer (NN), handle heat insulator (AD) and lid (T).
b) Insert one M6 bolt (AA), one M6 lock washer and on M6 flat
washer into each pre-drilled hole. Tighten the bolts by hand
c) Go back and tighten all bolts using the screwdriver provide until
secure.
Step 9
a) Put the lid upon the firebox.
b) Align the holes on the lid hinge with the holes
on the firebox hinge, and insert the pin (PP)
into the hinge hole.
c) Insert a hair pin (OO) into the hole on each end
of the pins to fasten the lid and grill body.
d) Repeat the procedure with another pin on left
back side of the firebox.