BROEN BALLOMAX, Техническое руководство

Страница: 7 / 37

BALLOMAX
®
API 6D Certified Trunnion Mounted Ball Valves - Technical Manual
7
Rev 08/2019
Applicable Standards and Specifications
The latest edition of the following specifications and standards will be used to
establish the basic requirements referenced throughout this pre-qualification for
the specific type of valves being inspected and tested.
Unless specifically designated by date, the latest edition of each publication shall
be used together with any amendments, supplements, or revisions.
API - AMERICAN PETROLEUM INSTITUTE
Spec. Q1 Specification for Quality Programs.
Spec. 6D Specification for Pipeline Valves.
6 FA Specification for Fire Test for Valves.
Std. 598 Valve Inspection and Testing.
Spec. RP6F Recommended Practice for Fire Test for Valves
Std. 607 Fire Test for Soft-Seated Quarter- Turn Valves.
ANSI - AMERICAN NATIONAL STANDARD INSTITUTE
B 16.5 Pipe Flange and Flanged Fittings.
B 16.10 Face-to-Face and End -to-End Dimensions of Valves.
B 16.25 Butt Welding Ends.
B 16.34 Valves-Flanged, Threaded and Welding Ends.
B 31.3 Chemical Plant and Petroleum Refinery Piping.
B 31.4 Liquid Transportation Systems for Hydrocarbons, Liquid
Petroleum Gas, Anhydrous Ammonia and Alcohols
B 31.8 Gas Transmission and Distribution Piping Systems.
ASTM - AMERICAN SOCIETY OF TESTING MATERIALS
ASTM VOLUME 01.01 Steel Piping, Tubing, Fitting.
ASTM VOLUME 01.02 Ferrous Casting, Ferroalloys.
ASTM VOLUME 01.05 Steel Bars, Forgings, Bearings, Chain, Springs.
ASME - AMERICAN SOCIETY OF MATERIALS ENGINEERS
ASME B 1.20.1 Pipe Thread and Flanged Fittings.
ASME B 16.5 Steel Pipe Flanges and Flanged Valves and Fittings.
ASME B 16.11 Forged Steel Fitting, Socket Welding & Threaded.
ASME B 16.20 Ring Joint Gasket & Grooves.
ASME B 16.25 Butt Welding Ends.
ASME B 16.34 Valves Flanged, Threaded and Welding Ends.
ASME B 16.47 Large Diameter Steel Flanges, NPS 26 through NPS 60.
ASME Sect. V Non-destructive Examination.
ASME Sect. VIII Rules for Construction of Pressure Vessels (Division 1).
ASME Sect. IX Welding and Brazing Qualifications.
IS0 - INTERNATIONAL STANDARD ORGANIZATION
228 Part 1 Pipe Threads, Designation, Dimensions and Tolerances.
5208 Pressure Testing to Valve 17121 Flanged Steel Ball Valves.
5210 Industrial Valves-Multi- Turn Valve Actuator Attachments.