Brodware 2.2702.90, Инструкция по установке и обслуживанию

Страница: 4 / 13

O U T L E T A N D S E N S O R I N S TA L L AT I O N G U I D E
F O R 2 . 2 7 0 5 . 0 0 , 2 . 2 7 0 5 . 2 0 , 2 . 2 7 0 6 . 0 0 A N D
2 . 2 7 0 6 . 2 0 M O D E L S
M I X E R I N S TA L L AT I O N :
1. Shut off water supply.
2. Ensure that the sensor is not installed within 300mm of any adjacent surface. Do not install the
sensor facing a mirror or any other system operated by an infra-red sensor.
3. Install a ½” BSP male thread for the outlet in the required location/position. (Refer to the dimensions
on the drawing for correct positioning). Screw the outlet into position to the thread.
4. Install the Sensor Mounting Tube. A Ø33mm hole is required through the finished face of the tile
Install the Sensor Mounting Tube at a minimum of 120mm below the outlet point. Leave 4-7mm of
tube protruding past the finished file face, to allow for fitment of the sensor eye.
5. Feed the leads from the transformer and the solenoid through from the rear of the Sensor Mounting
tube to the front face. Connect the sensor to the leads (1x male connection, and 1x female
connection). Push the sensor into the mounting tube. Secure the sensor to the Sensor Mounting
Tube with the grub screw from the underside of the sensor face. If there is a gap between the
finished tile face and the sensor eye, measure the gap and cut down the sensor Mounting
Tube accordingly.
6. Turn on the water and power supply, and test for functionality. Adjustments to the sensor range and
run time are done by using the appropriate remote control (C27.02.RM sold separately). If there are
any set up queries, please refer to the troubleshooting section in the back of this booklet.
Note: If there is not enough length in either lead, do not cut or make your own lead. Modifying or
making your own lead will void warranty. Brodware have extension leads to suit (part numbers are in
the spare parts list at rear of this booklet). Please contact your supplier to place your order.
N
OT
E
:
U
se 3
2m
m c
on
du
it t
o c
on
ce
al w
ir
in
g.
5 6