RTU32N Installation and Wiring
Guide
Brodersen A/S, Islevdalvej 187, DK-2610 Roedovre, Denmark, Tel: +45 45 35 26 27, Fax: +45 45 35 26 29, Email: [email protected]
8
Fast digital / 32-bit Counter Inputs
Input Range:
Standard: 5 to 30VDC, others on request
Maximum frequency:
up to 5 KHz
Isolation:
2KV Opto-isolated
Available on:
42IO version
Mains Power Supply
Power Supply
version 05
Power Supply:
10-30 VDC
Power Consumption:
4-12W depending on configuration and connected I/O expansion modules
Connection:
Removable screw connector – 3 wires (+, -, Gnd)
Position:
RTU top left
Power Supply version 10
Power Supply:
90-265V AC/DC
Power Consumption:
4-12W depending on configuration and connected I/O expansion modules
Connection:
Removable screw connector – 3 wires (+, -, Gnd)
Position:
RTU top left
Power Supply
version 30
Power Supply:
20-60 VDC
Power Consumption:
4-12W depending on configuration and connected I/O expansion modules
Connection:
Removable screw connector – 3 wires (+, -, Gnd)
Position:
RTU top left
RTU Front Panel
Figure 1: RTU32N Front Panel
Front Panel LCD and Keys
On the RTU32N front panel, there are a LCD display and 4 keys. Important statuses of the RTU32N, including statuses of communication
buses and I/O ports are shown on the LCD display. The displayed parameter on the LCD can be changed by the keys.