WARNING: Read this Manual Before
Operating
WARNING! You must read and understand these operating instructions thoroughly
and follow the procedures contained herein for the operation and servicing of the
Prime-Cut equipment to avoid serious injury or death to operator or bystanders or
damage to property.
Employers must be familiar with the correct operation of this torch and provide
operator training before allowing their personnel to begin using the Prime-Cut
equipment.
Prime-Cut cutting systems operate at a temperature of approximately 10,000
°
F,
enabling them to cut or melt virtually any known material. Sparks, splatter and
molten material generated by this process can cause fire, severe property damage,
bodily injury or death.
If you have any questions regarding the safe operation of Prime-Cut systems please
call:
Broco, Inc.
400 S. Rockefeller Ave.
Ontario, CA 91761
Tel: (800) 845-7259; (909) 483-3222
TO AVOID SERIOUS INJURY OR DEATH:
•
Never use the Prime-Cut cutting system or rods underwater with a
welding power source.
•
Always use a DC ignition system.
•
Always wear flame or spark resistant clothing, shoes and eye and face
protection.
•
Always know the composition of the target material.
•
Always know what is behind the target material.
•
Always clear the work area of bystanders and flammable materials.
•
Never point the torch at anybody.
•
Always use caution when cutting overhead to avoid falling sparks,
molten material and falling objects.
•
Always ensure that all parts of the Prime-Cut system are in good working
order prior to use to avoid potential malfunction.
Содержание Prime-Cut
Страница 32: ......
