Broco Prime-Cut, Руководство по эксплуатации

Страница: 11 / 32

5.2 Battery
• CHARGE A NEW BATTERY BEFORE USING.
•
CHARGE AFTER EACH SUBSEQUENT USE.
• DO NOT STORE A RECHARGEABLE BATTERY IN A FULLY OR PARTIALLY
DISCHARGED STATE.
• NOTE- BATTERIES MAY LOSE UP TO 3% OF THEIR CHARGE PER MONTH
DURING STORAGE.
WARNING!
Always use a 12 volt DC or 24 volt DC battery
.
Never use any other
power source.
Always make sure the battery is a safe distance from the immediate work area.
Never let sparks or molten material come into contact with the battery.
Never use a battery for ignition that is connected to a battery charger. Always
unplug the battery charger before attaching the ignition power cables to the
battery.
Never let the striker plate accidentally contact the torch, rods, or work area.
Electrical shock and sparks may result.
Caution
: The battery can discharge if the striker plate continuously contacts the
work area. Exercise caution to prevent complete discharge of the battery.
NOTE: Polarity does not matter for ignition since a direct short is required to ignite
the rod.
1. Connect the power cable from the torch to the black battery clamp by
connecting the black Cam-Lok plug on the torch cable to the Cam-Lok
receptacle inside of the black handle grips.
2. Connect the power cable from the striker plate to the red battery clamp by
connecting the red Cam-Lok plug on the torch cable to the Cam-Lok
receptacle inside of the handle grips.
3. Connect the battery clamps to the terminals of a 12v or 24v battery.