19. Do not wash clothes that contain alcohol, petrol or organic solvents.
20. Do not pour water on the control panel with timer to avoid electric shock.
DESCRIPTION OF DEVICE
PREPARATION OF THE APPLIANCE
1. The washing machine should be placed on a stable and flat surface (the maximum permissible
inclina
tion angle is 2°, in other case
the washing machine should be moved to a different place).
To avoid noise while operating, the distance between the washing machine and the wall must be
larger than 5cm.
2. The ventilation holes on bottom of the device's housing must not be covered with a rug.
WASHING
1. Before washing, check whether the drain hose is in the top position to prevent water outflow.
Connect the hose to the water tap. Insert the clothes to the washing chamber. Fill the washing
machine with hot water with
temperature of not more than 55 ° C to the upper
limit of the scale.
Water may also be poured by the machine lid. Add appropriate amount of washing powder. Close
the cover.
2. Connect the machine to a grounded power outlet. Set the washing machine timer on the
desired time by turning the knob to the right. Washing starts. If you want to interrupt the
program before the end of the set time, turn the timer to the left to switch of the machine and
remove mains plug with dry hand.
3. After finish of washing let the dirty water leave the washing machine using drain hose and
putting it into drains or capacious vessel.
SPINING
The washed and rinsed clothes put into the spin chamber. Close the protective cover. Close the
spin lid. Set the spin time by turning the timer to the right. Spinning can be stopped by turning
the timer to the left to position 0.
GB