Brocade Communications Systems ICX 6430 series Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 108

Brocade Communications Systems ICX 6430 series Скачать руководство пользователя страница 7

Preface

•

Document conventions...................................................................................................................................................................................... 7

•

Brocade resources............................................................................................................................................................................................... 8

•

Document feedback............................................................................................................................................................................................ 8

•

Contacting Brocade Technical Support.......................................................................................................................................................9

Document conventions

The document conventions describe text formatting conventions, command syntax conventions, and important notice formats used in
Brocade technical documentation.

Notes, cautions, and warnings

Notes, cautions, and warning statements may be used in this document. They are listed in the order of increasing severity of potential

hazards.

NOTE

A Note provides a tip, guidance, or advice, emphasizes important information, or provides a reference to related information.

ATTENTION

An Attention statement indicates a stronger note, for example, to alert you when traffic might be interrupted or the device might
reboot.

CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause damage to hardware,
firmware, software, or data.

DANGER

A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to you. Safety
labels are also attached directly to products to warn of these conditions or situations.

Text formatting conventions

Text formatting conventions such as boldface, italic, or Courier font may be used to highlight specific words or phrases.

Format

Description

bold

text

Identifies command names.

Identifies keywords and operands.

Identifies the names of GUI elements.

Identifies text to enter in the GUI.

italic

text

Identifies emphasis.

Identifies variables.

Identifies document titles.

Courier font

Identifies CLI output.

Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide

Part Number: 53-1003617-03

7

«
...
5
6
7
8
9
...
»

Содержание ICX 6430 series













































































































Отзывы:

Нет отзывов