Brocade Communications Systems DCX Backbone, Руководство по установке оборудования, Страница: 76 / 167

TABLE 8 CR blade LED descriptions
LED purpose Color Status Recommended action
Power Steady green CP blade is on. No action required.
No light (LED is off) CP blade is not on. Ensure that the blade is firmly
seated and has power.
Status No light (LED is off) CP blade is either healthy or
does not have power. Verify that the power LED is on.
Steady amber CP blade is faulty or the switch is
still booting. Ensure that the blade is firmly
seated and the switch has
completed booting. Blade may
not be compatible with other
blades in the chassis. See the
FCOE10-24 blade section for
limitations. If the LED remains
amber, consult the Brocade DCX
supplier.
Slow-flashing amber (on 2
seconds, then off 2 seconds) CP blade is not seated correctly
or is faulty. Pull the blade out and reseat it. If
the LED continues to flash,
replace the blade.
Fast-flashing amber (on 1/2
second, then off 1/2 second) Environmental range exceeded. Check for out-of-bounds
environmental condition and
correct it.
LINK LED No light (LED is off) No ICL or ICL cable present, but
no connection. Ensure that the ICL cable is
correctly installed.
Steady green ICL connected. No action required.
ATTN LED No light (LED is off) ICL operational. No action required.
Blinking amber Attention required. Ensure that the ICL cable is
correctly installed.
Determining the status of a power supply
1. Check the LED indicator on the power supply. The LED patterns may temporarily change during POST and other diagnostic
tests. For information about how to interpret the LED patterns, see the next table.
Determining the status of a power supply
Brocade DCX Backbone Hardware Installation Guide
76 53-1000685-24