Brocade Communications Systems DCX Backbone, Руководство по установке оборудования, Страница: 33 / 167

FIGURE 3 14U rack kit parts
1. Left rack mount shelf bracket
2. Right rack mount shelf bracket
3. 10-32 x 5/8 in. (1.58 cm) panhead Phillips screw and washer
4. 10-32 clip nut for cabinets that have rails with round holes
5. 1/4-20 x 1/2 in. (1.27 cm) panhead Phillips screw with lock washer for
cabinets that have rails with round holes
6. 10-32 retainer nut for cabinets that have rails with square holes
7. 1/4-20 x 1/2 in. (1.27 cm) panhead Phillips screw with thread locker for
cabinets that have rails with square holes
8. 3/8 in. (0.953 cm) alignment washer for cabinets that have rails with
square holes
Parts list – NEBS kit
The following table lists the parts supplied in the XBR-SLX9850-8-NEBS-KIT to help direct airflow away from the rack area. This kit is
only supported for specific devices, and may not apply to the device that you are installing.
NOTE
Depending on the device and installation, not all of the parts may be used.
Verify that the items listed in the following figure are included in the NEBS kit.
Installing the 14U Rack Mount Kit for Four-Post Racks (XBR-DCX-0120 and XBR-DCX-0152)
Brocade DCX Backbone Hardware Installation Guide
53-1000685-24 33