Brocade Communications Systems DCX Backbone, Руководство по установке оборудования

Страница: 113 / 167

Removal and replacement of the transceivers
NOTE
The 8-Gbps-capable mSFPs and SFP+s auto-negotiate at 2, 4, and 8 Gbps. The 4-Gbps SFPs auto-negotiate at 1, 2, and 4
Gbps. The mSFPs are compatible only with the FC8-64 high density port blade.
NOTE
The XFP transceivers are used only with the FC10-6 port card. They should not be used in any 1 GE port.
Time Required
The replacement procedure for a transceiver takes less than five minutes.
Items Required
• Replacement mSFP, SFP, SFP+, or XFP
• Optical transceiver extraction tool (for SFP, SFP+, and XFP transceivers)
Removing and replacing an SFP, SFP+, or XFP optical transceiver
Most Brocade switches and backbones come with a transceiver extraction tool and holster. The extraction tool is designed to remove
transceivers from switches and blades where the space is limited.
FIGURE 38 Optical transceiver (SFP, SFP+, and XFP) extraction tool
Removing an SFP, SFP+, or XFP transceiver
NOTE
mSFP optical transceivers should not be inserted into ports intended for SFP or SFP+ transceivers. They will be faulted on
power-up for Fabric OS 6.4.0 and later.
To remove an SFP, SFP+, or XFP (FC6-10 blade only) transceiver, complete the following steps.
1. Remove any cables that are inserted into the transceiver. Use the extraction tool to open the cable latching mechanism.
Removal and replacement of the transceivers
Brocade DCX Backbone Hardware Installation Guide
53-1000685-24 113