Brocade Communications Systems Converged Enhanced Ethernet 8000, Руководство администратора

Страница: 63 / 168

Converged Enhanced Ethernet Administrator’s Guide 41
53-1002163-02
CEE map configuration
5
DRAFT: BROCADE CONFIDENTIAL
4. Define the CEE map for PGID 1.
switch(config-ceemap)# priority-group-table 1 weight 50
5. Enter the copy command to save the running-config file to the startup-config file.
switch(config)# do copy running-config startup-config
Defining a Priority-Table map
To define a Priority Table map, perform the following steps in privileged EXEC mode.
1. Enter global configuration mode.
switch# configure terminal
2. Activate the CEE map mode.
switch(config)# cee-map default
3. Define the map.
switch(config)# priority-table 2 2 2 1 2 2 2 2
4. Enter the copy command to save the running-config file to the startup-config file.
switch(config)# do copy running-config startup-config
Applying a CEE provisioning map to an interface
To apply a CEE provisioning map, perform the following steps from privileged EXEC mode.
1. Enter global configuration mode.
switch# configure terminal
2. Specify the 10 Gigabit Ethernet interface. In this example, 0/2 is used.
switch(config)# interface tengigabitethernet 0/2
3. Apply the CEE map on the interface.
switch(conf-if-te-0/1)# cee-map default
4. Return to privileged EXEC mode.
switch(conf-if-te-0/1)# exit
5. Enter the copy command to save the running-config file to the startup-config file.
switch(config)# do copy running-config startup-config
Verifying the CEE maps
To verify the CEE map, perform the following steps from privileged EXEC mode.
1. Enter global configuration mode.
switch# configure terminal
2. Verify the CEE map provisioning for a specified name.
switch(config)# show cee maps default