background image

40

Brocade 6520 Hardware Reference Manual

53-1002705-01

Regulatory compliance

A

DRAFT: BROCADE CONFIDENTIAL

Warning:

This is Class A product. In a domestic environment this product may cause radio interference in 
which case the user may be required to take adequate measures.

CE statement

ATTENTION

This is a Class A product. In a domestic environment, this product might cause radio interference, 
and the user might be required to take corrective measures

The standards compliance label on the Brocade 6520 contains the CE mark which indicates that 
this system conforms to the provisions of the following European Council directives, laws, and 
standards:

Electromagnetic Compatibility (EMC) Directive 2004/108/EEC

Low Voltage Directive (LVD) 2006/95/EC

EN50082-2/EN55024:1998 (European Immunity Requirements)

-

EN61000-3-2/JEIDA (European and Japanese Harmonics Spec)

-

EN61000-3-3

Canadian requirements

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing 
Equipment Regulations, ICES-003 Class A.

German statement

Maschinenlärminformations-Verordnung – 3 GPSGV, der höchste Schalldruckpegel beträgt  ??.? 
dB(A) gemäss EN ISO 7779.

Machine noise information regulation – 3. GPSGV, the highest sound pressure level value is ??.? 
dB(A) in accordance with EN ISO 7779.

Laser compliance

This equipment contains Class 1 laser products and complies with FDA Radiation Performance 
Standards, 21 CFR Subchapter I and the international laser safety standard IEC 825-2.

ATTENTION

Use only optical transceivers that are qualified by Brocade Communications Systems, Inc. and 
comply with the FDA Class 1 radiation performance requirements defined in 21 CFR Subchapter I, 
and with IEC 825-2. Optical products that do not comply with these standards might emit light that 
is hazardous to the eyes.

Содержание Brocade 6520





























































Отзывы: