Brocade Communications Systems Brocade 6520, Справочное руководство

Страница: 15 / 60

Brocade 6520 Hardware Reference Manual 3
53-1002705-01
Port side of the Brocade 6520
1
DRAFT: BROCADE CONFIDENTIAL
Platform components
•
A system motherboard that features a primary CPU running at 1.25 GHz, with integrated
peripherals, and that provides high performance with low power consumption.
•
One 2 GB DDR2 running at 400 MHz.
•
Boot memory of 8 MB. Expandable to 16GB.
•
One 2 GB compact flash card.
•
Up to 96 16 Gbps Fibre Channel ports.
•
An RJ45 10/100/1000 BaseT Ethernet system management port (RJ45 connector), in
conjunction with EZSwitchSetup, that supports switch IP address discovery and configuration,
eliminating the need to attach a serial cable to configure the switch IP address and greatly
increasing the ease of use.
•
One RS-232 console (serial) port with RJ45 connector for initial switch setup (if not using
EZSwitch Setup) and factory default restoration. (the integral LEDs remain unlit at all times)
•
One USB 2.0 port that provides storage for firmware updates, output of the supportSave
command and storage for configuration uploads and downloads.
•
Two hot-swappable, redundant power supplies (power supplies are 80+ Platinum certified for
efficiency)
•
Three hot-swappable fan FRUs.
•
Rack-mount design (2U form factor) in a 19-inch EIA rack.
•
One LED (green/amber) per FC port to indicate status.
•
One LED (green) for system power.
•
One LED (green/amber) for system status.
•
Two Ethernet LEDs (integrated with RJ45) for speed and activity status.
•
Two LEDs per power supply. One green for AC line in status and one green/amber for DC power
out.
•
One LED (green) per fan.
•
SEEPROM for switch identification.
•
Voltage monitoring.
•
Fan monitoring including flow direction.
•
Temperature monitoring.
•
Real-time clock (RTC) with battery.
Port side of the Brocade 6520
The port side of the Brocade 6520 includes the system status LED, console port, Ethernet port and
LEDs, USB port, and Fibre Channel ports and the corresponding port status LEDs.
Figure 1 shows the port side of the Brocade 6520.