Brobo 3M, Руководство по эксплуатации и обслуживанию

Страница: 22 / 23

APPENDIX - RISK/HAZARD ASSESSMENT
Hazard Type Hazard Identification
Hazard
Assessment
Hazard Management Strategies
(Recommended for the Purchasing / Buyer / User)
Cutting/Severing Low/Med
Keep machine correctly guarded and operational at
all times.
Keep hands clear of rotating drill bit.
Entanglement Low
Do not wear loose jewellery, clothing or items that
might get caught in the drill.
Always keep the work area free of unnecessary
objects or tools.
Mechanical
Impact Low
Wear protective safety glasses when utilising the
drilling machine.
Strongly encouraged that steel-capped safety boots
be worn during operation of drill machine.
Electrical Electrocution Low
Remove the power supply when any maintenance
and/or repairs are to be undertaken.
Power source is to be isolated prior to opening
electrical enclosures.
Noise - Low
Under no load testing, the noise level measured is
below 80db (A).
If the noise level becomes too high during a drilling
cycle, stop the process and inspect for problem, if
any are present.
Substance -
Low
Keep the work area clean and regularly remove
excess coolant, oils and other aggregate.
Hazardous Events Unexpected Start Up Low
During a power failure, turn the machine off.
If problem persists, please contact Brobo Group
engineering department.
Additional
Hazards
Operator Error Low
Ensure blades, clamps and materials are correctly
secured.
MACHINE TYPE:
SERIAL NO.:
RECEVING COMPANY:
(SAFETY OFFICER)
19
BROBO WALDOWN (AUST) PTY. LTD.
A.C.N. 098 264 316
A.B.N. 42 098 264 316
65-67 Williams Rd, Dandenong, 3175
PO BOX 4274 Dandenong Sth, 3164
Victoria, AUSTRALIA.
Tel: 61 3 9794 8751 Email: info@brobo.com.au
Fax: 61 3 9794 8792 Website: www.brobo.com.au
Quality
Endorsed
Company
ISO 9001 Lic. 10292
SAI GLOBAL
Q
ua
lit
y
Sy
st
em