Brobo 3220020, Руководство по эксплуатации и обслуживанию

Страница: 8 / 24

Brobo Group
brobo.com.au
2.1.2. Power Supply
The 240/415V power supply requirements for this machine are of a high level & unauthorized interference & or
inadequate maintenance could result in a situation that could put the operator at risk. A
qualified
electrical engineer
should always be assigned to maintain & repair the system.
2.2. General Requirements
2.2.1. Lighting
Insufficient lighting during the operation of the unit would constitute a safety hazard for the people concerned. For
this reason, the user of the machine must provide adequate lighting in the working area to eliminate areas of shadow,
whilst also prevent dazzling illumination sources
(Reference standard
ISO 8995 - 2002 ‘Lighting of Indoor Workplaces’
).
2.2.2. Connection
Check that the power supply cables, compressed air supply (if applicable) & coolant system complies with, & are
operating within the acceptable range of the grinder capabilities.
Faulty, damaged or worn components must be replaced immediately.
2.2.3. Earthing Systems
The installation of the earthing system must comply with the requirements stated in the:
IEC Standards Part 195: Earthing & Protection Against Electric Shocks 1998.