Brobo 3220020, Руководство по эксплуатации и обслуживанию

Страница: 4 / 24

Brobo Group
brobo.com.au
CHAPTER 1 - Installation of the Machine
1.1. Unpacking & Handling the Machine
Upon receiving the
Brobo Group PEDESTAL GRINDERS PG350
, the machine should be standing upright &
positioned centrally on top of a wooden pallet.
Carefully remove the packaging surrounding the pedestal grinder. Position the grinder to the desired location,
ensuring that a power outlet is available and within reach of the grinder power cord. Loosen the base bolts restraining
the grinder and sling a harness around the body of the unit while being mindful that equal weight distribution is
required to prevent it from tipping. Raise the pedestal grinder, slide the pallet away from the machine and re-lower
the grinder to the final location.
Prior to powering up the grinder, place the desired wheel/buff mop onto the machine spindles. Note that if the bore
sizes on the grinding wheels and/or buffering mops do not fit the spindle, taper adapters and buff adapters are
readily available for purchase from most hardware and tool outlets.
Once the wheels/buffs are securely fastened to the machine, connect the grinder to the mains electrical supply and
power up the machine.
FIGURE 1 .
Shipping of grinder unit