B r o b o P t y . L t d . D a n d e n o n g S o u t h
P l a n t R i s k A s s e s s m e n t R e p o r t
MARCH 2009
18
SCOPE
A risk assessment program of plant items was commenced on behalf of Brobo Pty. Ltd. Dandenong South during
March 2009. The assessment was commissioned by Mr David Golic. Plant items assessed were located within the
manufacturing facility located at 66-68 Williams Rd. Plant assets inspected were as per the Operating Maual for 200
/ 250 HD OHS Series Bench Grinder Sn.
B 29600 to B99999
As far as practicable, risks have been assessed against relevant Australian Standards, the Code of Practice for
Plant No. 19, 1 July 1995. The Risk Assessments are completed under the “Generic” classification as defined by the
Code.
METHOD
HAZARD
Parts, accessories, components or other items together with the likely use, materials used as part of the process,
cleaning procedures and maintenance procedures are some of the items given due consideration as to the
likelihood of presenting Health and Safety risks to personnel . These items identified as hazards are described under
the heading of “Hazard”.
The Hazard listed in column 1 of the Risk Assessment.
RISK
The level of the Risk associated with each Hazard is based on AS 4360 Risk Management, consistent with
Worksafe Victoria guidelines.
The qualitative measures are:
6
•
Catastrophic (multiple deaths, loss over $1,000,000)
5
•
Disaster (single death, loss to $1,000,000)
4
•
Very serious (Permanent disability, loss to $1,000,000 )
3
•
Serious (extensivemedical treatment required, lost time >7 days, loss to
$500,000)
2
•
Substantial ( medical treatment, lost time <7 days
1
•
Minor (first aid treatment, lost time < 1 day )
