Broan NuTone RDMWT2, Руководство по установке

Страница: 5 / 20

RDMWT2 Installation Guide Page 5
Install Grille
FOR FAN MODELS WITHOUT LIGHTS
28. Squeeze
GRILLE SPRINGS (R) and slide into tabs on the
radiation damper frame. Push
GRILLE (S) until it’s tight
against ceiling surface.
29. Follow instructions packed with the fan to finish the
installation.
FOR FAN MODELS WITH LIGHTS
28. Attach connector from the
LIGHT JUMPER WIRE (T) to
mating connector from the grille.
29. Squeeze
GRILLE SPRINGS (R) and slide into tabs on the
radiation damper frame. Push
GRILLE (S) until it’s tight
against ceiling surface.
30. Follow instructions packed with the fan to finish the
installation.
REMOVE THE MASK BEFORE INSTALLING GRILLE OR
OPERATING FAN.
Install Mask, Finish Ceiling and
Install Plaster Supports
25. Install CORRUGATED MASK (O) supplied with the fan to
protect unit from drywall spray, construction dust, etc.
26. Finish the ceiling around radiation damper opening. Ceiling
opening must be no larger than the outside of the radiation
damper.
27. Remove corrugated mask and fasten (2) PLASTER SUP-
PORTS (P) to the radiation damper extension with (6) #8 x
3/8” SELF-DRILLING SHEET METAL SCREWS (Q). (Sup-
plied in radiation damper parts bag.)
P
Q
O
R
S
S
R
T