E.01
Fire dampers
KIT ONE
Accessories for fire
dampers
Motorisation kit
WWW.CAIROX.BE
Motorisation sets for fire dampers
type KIT ONE
Motorisation kit for fire dampers
CR60, CR120, CR2, CU-LT
and
CU2
Application
¾
For changeover of dampers with manual mecahnism with fusible link towards
à motorized mechanism
¾
For replacement of defect fire damper servomotor
Composition
¾
ONE actuator with spring return equipped with a thermo-electrical fuse.
¾
Mounting screws and shaft extension for changeover from manual fusible link
mechanism CFTH or MFUS(P) towards motorized mechanism
¾
Mounting plate only needed when replacing CFTH mecanisms, not to be used
for replacing MFUS(P) mecanisms
¾
Mounting instruction
Mounting
¾
According included mounting instruction
Specifications
ONE T ... FDCU TYPE:
¾
Torque motor + spring return: 7 Nm
¾
Voltage
ONE T 24 FDCU
: 24V AC/DC
¾
Power (in rest): 0.28 W
¾
Power (in use): 4.2 W
¾
Voltage
ONE T 230 FDCU
: 230V AC
¾
Power (in rest): 0.57 W
¾
Power (in use): 4.2 W
¾
Regulation: open/close with spring return
¾
Equipped with a thermo-electrical fuse, duct temperature 72°C
¾
Integrated start switch and circuit breaker
¾
Running time motor wired: <75s
¾
Running time motor with battery 9V: <85s
¾
Running time spring: <30s
¾
Protection class: IP54
¾
Cable cross-section: 0.75 mm²
¾
Switches: max 1A 60V
E.01 KIT ONE 1/2 - 2022/8/29 - BE-EN
