EZ80C
Installation Guide
Page 6
Installation - Replace an Existing Fan
120 VAC
LINE IN
ON/OFF
SWITCH
(purchase separately)
KNOCKOUT
PLATE
RECEPTACLE
120 VAC LINE IN
SWITCH BOX
BLACK
WHITE
GROUND (green or bare)
Connect house wiring to
wiring plate with UL approved
connector.
Connect wiring as
shown in diagrams.
Attach wiring plate and wiring
cover to inside of housing with
screws provided.
Plug blower
into receptacle
and re-install
blower. Tighten
blower screws.
7
Connect Electrical Wiring
8
Replace Blower
9
Install Grille
Squeeze
grille springs
and insert
into slots in
blower.
1
Push grille up against ceiling.
2
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE THE FOLLOWING:
If unfamiliar with electrical wiring, secure the services of a
qualified person to connect wiring according to all applicable
codes and standards.
