3
1. P
REPARE
INSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. S
ELECT
INSTALLATION
TYPE
. . . . . . . . . . . . . . . . . . . . . . . . . 3
3. W
IRING
INSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. I
NSTALL
HOOD
MOUNTING
BRACKET
. . . . . . . . . . . . . . . . . . . . 4
5. I
NSTALL
UPPER
FLUE
MOUNTING
BRACKET
. . . . . . . . . . . . . . . . 5
6. R
EMOVE
GREASE
FILTERS
. . . . . . . . . . . . . . . . . . . . . . . . . . 5
7. I
NSTALL
6”
ROUND
ADAPTER
/
DAMPER
. . . . . . . . . . . . . . . . . . . 5
8. I
NSTALL
THE
HOOD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
9. D
UCT
CONNECTION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
10. P
REPARE
THE
DECORATIVE
FLUE
. . . . . . . . . . . . . . . . . . . . . . 8
11. I
NSTALL
THE
DECORATIVE
FLUE
. . . . . . . . . . . . . . . . . . . . . 8-9
12. R
EINSTALL
GREASE
FILTERS
. . . . . . . . . . . . . . . . . . . . . . . . . 9
13. O
PERATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
14. C
ARE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
15. R
EPLACEMENT
PARTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
16. W
ARRANTY
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
TABLE OF CONTENTS
1. PREPARE INSTALLATION
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the retailer.
Make sure that the following items are included:
- Hood
- Decorative flue assembly (lower and upper flues)
- Hood mounting bracket
- Lower flue mounting bracket
- Upper flue mounting bracket
- 2 Aluminum grease filters
- 6” Round adapter/damper
- Installation
instructions
- Parts bag: 10 no. 8 x 5/16” mounting screws,
7 no. 8 x 1½” mounting screws,
7 drywall anchors, 2 washers
Parts sold separately:
- Ducts, elbows, wall and roof caps.
- Optional flue extension for 10-ft. ceilings model FXN58SS.
- Non-duct kit model RK58, mandatory for non-ducted installation.
NOTE: During installation, protect countertop and/or cooktop.
HR0202A
D
ECORATIVE
FLUE
L
OWER
FLUE
MOUNTING
BRACKET
H
OOD
MOUNTING
BRACKET
U
PPER
FLUE
MOUNTING
BRACKET
6” R
OUND
ADAPTER
/
DAMPER
2. SELECT INSTALLATION TYPE
2.1 N
ON
-D
UCTED
I
NSTALLATION
The RK58 non-duct kit is required for a non-ducted installation.
2.2 D
UCTED
I
NSTALLATION
Plan where and how the ductwork will be installed.
A straight, short duct run will allow the hood to perform most efficiently. Long duct
runs, elbows and transitions will reduce the performance of the hood. Use as few
of them as possible. Larger ducting may be required for longer duct runs.
Install wall or roof cap. Connect 6” round metal ductwork to cap and work back
towards the hood location. Use 2” metal foil duct tape to seal the joints.
2.3 A
LL
I
NSTALLATIONS
The minimum hood distance above cooktop is 26” (30” over a gas range).
A maximum of 30” above cooktop is recommended for best capture of cooking
impurities.
Distances over 30” are at the installer and users discretion providing that ceiling
height and decorative flue length allow it.
6” R
OUND
DUCT
R
OOF
CAP
6” R
OUND
ELBOW
W
ALL
CAP
H
OOD
D
ECORATIVE
FLUE
HH0251A
26”
MINIMUM
ABOVE
COOKING
SURFACE
(30”
FOR
GAS
RANGE
)
WARNING
!
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
