8
10. PREPARE THE DECORATIVE FLUE
L
OUVERS
HO0285
L
OWER
FLUE
REAR
NOTCH
Peel off both corners at the top of the upper flue.
NOTE: For non-ducted installation only, remove enough plastic film to clear the louvers.
Position the lower flue rear notches down.
Gently slide upper flue inside lower flue, louvers end up.
Both lower and upper flues are included with the hood, but for a 10-foot ceiling, discard the provided
upper flue and use the optional flue extension, part no. FXN58SS (sold separately).
Remove the upper flue from inside the lower flue. Remove protective plastic film covering the
lower flue only. Install the lower flue bracket to its flue using 2 no. 8 x 5/16” mounting screws,
ensure that the slots point up.
HO0114
L
OWER
FLUE
MOUNTING
BRACKET
B
ACK
VIEW
S
LOTS
UP
L
OWER
FLUE
11. INSTALL THE DECORATIVE FLUE
Carefully slide in place decorative flue base (notches end first) in the groove on the top of the
hood. Slightly slide up the upper flue to avoid any damage while installing the lower flue to the
top of the hood using 2 no. 8 x 5/16” screws through the lower flue side slots.
HO0286
