- 4 -
INSTALL MOUNTING
BRACKETS
1. Construct wood wall framing that is flush
with interior surface of wall studs.
Make sure:
a) the framing is centered over installation
location.
b) the height of the framing will allow the
mounting brackets to be secured to the
framing within the dimensions shown.
2. After wall surface is finished, secure
mounting brackets to framing using
dimensions shown.
32-11/16” to 38-5/8” above
cooktop
FRAMING BEHIND DRYWALL
VERSION 90cm
9-5/8”
9-5/8”
32-11/16”= bottom of hood 24" above cooktop
38-5/8"= bottom of hood 30" above cooktop
INSTALL THE HOOD
1. Hang the hood from the brackets through
the rectangular cut-outs on the back of the
hood. Cut-outs are larger than the brackets
to allow for horizontal adjustment.
The bottom of the hood should be 24" to 30"
above the cooking surface.
2. Height adjustment screws provide vertical
adjustment.
3. Depth adjustment screws provide
horizontal adjustment.
4. Secure the hood with additional mounting
screws. Use drywall anchors, provided, if
wall studs or framing are not available.
WALL
FRAMING
MOUNTING
BRACKETS
RECTANGULAR
CUTOUTS
ADDITIONAL
MOUNTING
SCREWS
HEIGHT ADJUSTMENT SCREWS
DEPTH ADJUSTMENT
SCREWS
ADDITIONAL
MOUNTING
SCREWS
34-7/16” to 40-7/16” above
cooktop
FRAMING BEHIND DRYWALL
VERSION 48”
34-7/16”= bottom of hood 24" above cooktop
40-7/16”= bottom of hood 30" above cooktop
33-15/16” to 39-15/16” above
cooktop
FRAMING BEHIND DRYWALL
VERSION 42”
9-15/16”
9-15/16”
8-7/8”
8-7/8”
33-15/16”= bottom of hood 24" above cooktop
39-15/16"= bottom of hood 30" above cooktop
