Broan 345GOBK, Инструкция по эксплуатации

Страница: 3 / 12

MODELS 345GOBK • 345GOWW
Page 3
6. Working from inside the attic, find the center of the
selected solar panel location identified in step 2, drill a
small hole in the roof decking large enough for the solar
panel wire to fit through.
7. Working from roof side, feed the solar panel wire through
the hole into the attic.
8. Run a bead of silicone or roof cement around the
perimeter of the underside of the solar panel and secure
to the roof using nails or screws. Nail or screw all corners
and perimeter of base every 6 inches. Seal the fastener
heads with silicone or roof cement.
9. From inside the attic, apply silicone around the wire
where it enters the roof.
10. Connect the red wire to the negative motor terminal and
the black wire to the positive motor terminal. Tape or tie
extra wire to prevent contact with the fan blade.
11. Remove cardboard from the solar panel and verify that
the ventilator operates.
REMOTE SOLAR PANEL
INSTALLATION
1
2
3
4
SERVICE PARTS
Replacement parts
can now be ordered
on our website.
Please visit us at
www.Broan.com
Model Model
Key 345GOBK 345GOWW Description
No. (Black) (Weathered Wood)
1 77001317 77001318 Solar Panel Assembly
2 CWT45 CWT45 Thermostat (Optional)
3 79310005 79310005 Fan Blade w/ Set Screw
4 79080082 79080082 Motor, DC
5 77001285 77001286 Roof Sheet Panel
5