DiViNe Route/Repeat 66/33
9
rev. 1.0
HEALTH LED:
Green: Power supply to the device is working, temperature is within limits
PWR 1 LED:
Green: Power supply 1 is receiving power and working
PWR 2 LED:
Green: Power supply 2 is receiving power and working
USB connector:
USB connection for remote control via PC
USB LED:
Green: Indicates data activity
RS232 connector:
RS232 (D-Sub-9) connection for remote control and firmware updates via PC
LAN LINK:
S1:
Ethernet communication is established via SANE 1 (rear panel)
S2:
Ethernet communication is established via SANE 2 (rear panel)
UP:
There is another device with an enabled Ethernet port on the network
L1:
Ethernet communication is established via LAN 1 (rear panel)
L2:
Ethernet communication is established via LAN 2 (rear panel)
Sample rate LED:
Yellow: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
