DiViNe Route/Repeat 66/33
3
rev. 1.0
Owner Information
•
Operating Manual
Please read this manual. If you call for technical support, we will assume that you have already done
so. Study the operating manual carefully in order to familiarise yourself with the device and its
operation. The operating manual contains important information and tips on proper use of the device.
It cannot be guaranteed that this operating manual does not include typographical mistakes or
misprints. The operating manual is regularly revised and updated.
Modifications, which serve the purpose of technical improvement of the device, may be carried out
without prior notification.
•
Transport and Shipping
Always ensure careful handling of the device. If possible, transport and shipping of the device should
always be carried out in shock-absorbing transport cases. If these are not available, we recommend
well-padded packaging such as the coated carton in which the device was delivered.
We strongly advise against the use of light weight flight-cases without shock-absorbing rack-in-rack
mounting.
•
Operational Environment
This device can be operated in E1, E2, E3, E4, or E5 environments (as listed below) according to the
harmonised European standards EN55103-1 and EN55103-2 “Electromagnetic compatibility –
Product family standard for audio, video and audio-visual and entertainment lighting control
apparatus for professional use”
E1-Residental
E2-Commercial and light industrial
E3-Urban outdoors
E4-Controlled EMC environment e.g. broadcast and TV-studio
E5-Heavy industry
The product is intended for use in moderate climates.
•
Ventilation
Do not block or cover any ventilation openings. Install the device in accordance with the operating
manual. Allow for sufficient space around the units (at least 200 mm
≡
7,87" free space behind the
rear-panel of the device) and make sure to allow for air circulation near the ventilation openings on
both sides of the device. Keep the rear of the rack open during operation. Do not operate the device
close to heat emitting equipment, such as power-amplifiers. Leave sufficient space (minimum ½ RU)
between the device and any heat emitting devices housed in the same rack. A Route/Repeat 66/33
device may be placed on top or beneath other BroaMan products, without a space between the
devices.
•
Water and Moisture etc.
To prevent fire or shock hazard, do not expose the device to direct sunlight, dust, water or rain during
operation or storage.
•
Cleaning
To clean the device, use a dry linen cloth. If the unit is very dirty, lightly moisten a cloth using water
and a small amount of household detergent. Never use cleaning agents containing solvents to clean
the device.
•
Operating and Storage Temperature
Operating temperature: -20
°
C …50
°
C
≡
-4
°
F … 122
°
F; ensure proper ventilation
Storage temperature: -20
°
C …60
°
C
≡
-4
°
F … 140
°
F
