User Manual
www.broad-radio.com
© 2017 Broadradio, Inc. All rights reserved.
Visit our website at www.broad-radio.com or contact your local Broadradio representative or BusinessPartner for
more information.
Installation Instructions
Assemble mounting kits as per Figure 2 and 3 of this document.
Do not install near power lines. Power lines,
telephone lines, and guy wires look the same.
Assume any wire or line can electrocute you
Do not install on a wet or windy day or
when lightning or thunder is in the area.
Do not use metal ladder
Wear shoes with rubber soles and heels.
Wear protective clothing including a
long-sleeved shirt and rubber gloves.
1. Attach the mounting kit assembly to the antenna, before trying to clamp
the brackets to the pole.
2. Downtilt angles in 1
o
increments can be obtained with the correct
adjustment of the tilt arm bracket.
Downtilt can be achieved by aligning the corresponding hole in the
tilt arm to the pivot bracket which mates against the mounting pole,
as shown in Figure 4. The first hole is for 1
o
downtilt*, with each
consecutive hole resulting in an increased inclination of 1
o
.
For 0
o
downtilt the tilt arm may be stowed as show in Figure 4.
An inclinometer or other angular measuring device should be used
to verify downtilt angle as required.
The clamp brackets can clamp pipe diameters between 70-114 mm
