User Manual
www.broad-radio.com
© 2017 Broadradio, Inc. All rights reserved.
Visit our website at www.broad-radio.com or contact your local Broadradio representative or BusinessPartner for
more information.
2. Loosen the fasteners holding the bottom antenna bracket to the bottom
pivot bracket. Do not remove them, See Figure 6.
Figure 6: Lower Mounting Bracket Assembly
3. Remove the M12 bolts, washers, and nuts from the pivot bracket. The antenna
may tilt down to the extent allowed by the tether installed in step 1, See Figure 7.
Figure 7: Upper Mounting Bracket Assembly
4. The desired downtilt angle may be obtained with the correct adjustment of the
tilt arm bracket. See the installation instructions above for detailed information.
5. Adjust the antenna downtilt to the desired angle and reinstall the M12 bolts,
washers, and nuts between the upper pivot bracket and the tilt arm.
6. Tighten all four M12 nuts to 38 Nm
7. Remove the tether.
