20 Element Yagi
TV Aerial Group K
LABGT20K
User Guide
Support: www.labgear.co.uk/support
1
General Safety Precautions
Do not undertake work outdoors at height unless you are
competent in the use of ladders and other access equipment.
Always use correct equipment, observe appropriate safety
precautions and follow manufacturers instructions. If in doubt
consult a professional installer.
Before starting installation check structure is sound and check for
hidden wiring or plumbing.
When working on an installation outside, beware of overhead power lines.
Observe safe working practices, tread carefully on roofs and ensure
adequate lighting is available if working in loft or roof space.
Before making any connections switch electricity off at the mains.
To avoid injury always route cables or wiring carefully. Ensure cable
is correctly routed before fixing into position, taking care not to
overtighten cable clips.
This kit contains small parts - keep them out of reach of children.
After installation make regular maintenance checks for wear and tear.
Congratulations on the purchase of your
20 Element Yagi TV aerial. The aerial is ideal for
the reception of all available signals in medium
and weak signal areas.
• Tuned to prevent interference from 4G/5G mobile signals
• Easy to assemble with clip-on reflectors
• Electronic 75Ω balun
• Connection: F type
Aerial assembly
1. Reflectors
2. Boom (front) x1
3. Boom (back) x1
4. Balun x1
5. Centre mount bracket x1
(inc. clips and fixings)
6. Mast clamp assembly x1
7. Boom joining bracket x1
(inc. bolts & wing nuts)
8. Weather Boot x1
9. F Plug x1
4
2
3
5
6
7
Box Contents
1
8
9
Slot the reflectors
1
into the sockets on the back of the boom
3
until they click into place, make sure the reflector blades are
facing backwards as shown below .
A
Join the front and back parts of the boom
2
&
3
using the joining bracket
7
B
1
1
2
3
4
5
6
7
