Broadcom NetXtreme BCM57 Series, Руководство пользователя

Страница: 29 / 174

Windows Driver and Management Application Installation NetXtreme User Guide
Broadcom
®
April 2017 • 2CS57XX-CDUM514-R Page 29
3. Click Add Port .
4. Enter a meaningful Name , for example “WinRM rule” and port number, for example, 5985 for HTTP or 5986
for HTTPS.
5. Click OK .
Useful WinRM Commands
Useful WinRM Websites
• http://msdn.microsoft.com/en-us/library/aa384372%28v=vs.85%29.aspx
• http://technet.microsoft.com/en-us/library/cc782312%28WS.10%29.aspx
• http://msdn.microsoft.com/en-us/library/aa384295%28v=VS.85%29.aspx
• The following articles on “http://support.microsoft.com :
• “Configuring WINRM for HTTPS”
• “Windows Management Framework (Windows PowerShell 2.0, WinRM 2.0, and BITS 4.0)”
WS-MAN Windows Client Installation
On the Windows client, perform following configuration steps.
1. Perform HTTP Configuration (if you plan to use HTTP)
a. Click
Start (or press the Windows logo key) and select Run .
b. Enter gpedit.msc to open the local Group Policy editor.
c. Under Computer Configuration , open the Administrative Templates folder and then open the
Windows Components folder.
d. Select Windows Remote Management (WinRM) .
e. Under Windows Remote Management (WinRM) , select WinRm Client .
f. Under WinRM Client , double-click Trusted Hosts .
g. In the TrustedHostsList , enter the host names of the clients and click OK . If all clients are trusted then
enter “*” only.
h. Select WinRM Service .
i. Enable Allow Basic Authentication and click OK .
j. Run the following command from the command prompt to test the connection:
winrm id -remote:<remote machine Hostname or IP Address>
2. Perform HTTPS Configuration (if you plan to use HTTPS)
Command Description
winrm quickconfig or winrm qc
Configures WinRM with default settings
winrm enumerate winrm/config/Listener
or
winrm e winrm/config/Listener
Helps to check which service listener are enabled and
listening on which port and IP Address.
winrm get winrm/config/Service
Checks WinRM Service Configuration.
winrm delete winrm/config/
Listener?Address=*+Transport=HTTPS
Deletes a Listener (in this case deleting a HTTPS listener).