Broadcom MegaRAID 9540-2M2, Руководство пользователя

Страница: 9 / 14

Broadcom 9540-2M2 User Guide Broadcom
®
MegaRAID
™
9540-2M2 Boot Adapter
made available on the Support and Download center. Visit http://www.broadcom.com/support/download-search and
download the latest firmware and driver for the adapter.
MegaRAID 9540-2M2 Boot Adapter – Connector and LED Designations
The adapter is a 2.536 in. × 6.9 in. (64.41 mm × 175.26 mm) board. The component height on the top and bottom of the
adapter complies with the PCIe Card Electromechanical specification.
The following figure shows the connectors and LED locations on the adapter. A red circle near each header and connector
identifies pin 1 in the figure.
Figure 3: Card Layout for the MegaRAID 9540-2M2 Boot Adapter
Table 1: Headers and Connectors
Connector Type Description
J2 Standard edge card connector The interface between the storage adapter and the host system.
With the PCIe interface, this connector provides power to the board and an I
2
C
interface connected to the I
2
C bus for the IPMI.
J4 Default SBR header 2-pin connector. Reserved for Broadcom use.
J8 Onboard serial UART connector 4-pin connector. Reserved for Broadcom use.
Broadcom 9540-2M2-UG100
9