Broadcom MegaRAID 9540-2M2, Руководство пользователя

Страница: 8 / 14

Broadcom 9540-2M2 User Guide Broadcom
®
MegaRAID
™
9540-2M2 Boot Adapter
Figure 2: Installing an Adapter in a PCIe Slot
8. Provide the required airflow for the installed adapter. See MegaRAID 9540-2M2 Boot Adapter Technical
Specifications to find the adapter’s cooling requirements.
9. Turn on the power to the system. Reinstall the computer cover and reconnect the AC power cords. Turn on power to
the host computer.
During boot, a BIOS message appears. The firmware takes several seconds to initialize. The configuration utility
prompt times out after several seconds. The second portion of the BIOS message shows the adapter controller
number, and firmware version. The numbering of the adapters follows the PCIe slot scanning order used by the host
motherboard.
10. Choose the correct storage profile. Refer to the
12Gb/s MegaRAID Tri-Mode Software User Guide
and
LSI
®
Storage
Authority Software User Guide
for details about setting up your adapter.
11. Install the operating system driver. The adapters can operate under various operating systems. To operate under
these operating systems, you must install the software drivers. The firmware and drivers are routinely updated and
Broadcom 9540-2M2-UG100
8