manualshive.com logo in svg

Broadcom Brocade G630, Руководство по установке оборудования

Поделиться
Скачать
Broadcom Brocade G630 Скачать руководство пользователя страница 61

NOTE

16- and 32-Gbps SFP+ transceivers have pull tabs instead of bails. Always use the pull tab to insert or remove the SFP+
transceivers, as the SFP might be hot.

1. Remove any cables that are inserted into the transceiver.
2. Grasp the SFP+ transceiver pull tab and pull the tab straight out.

NOTE

Grasp the tab near the body of the transceiver to reduce the chances of bending the pull tab. As the SFP may be hot,
avoid touching it.

3. To insert the replacement transceiver, use the pull tab on the SFP+ transceiver to carefully push the transceiver into the port.

Transceivers are keyed so that they can only be inserted with the correct orientation. If a transceiver does not slide in easily,
ensure that it is correctly oriented.

NOTE

Each SFP+ transceiver has a 10-pad gold-plated PCB-edge connector on the bottom. The correct position to insert
an SFP+ transceiver into the upper row of ports is with the gold edge down. The correct position to insert an SFP+
transceiver into the lower row of ports is with the gold edge up.

FIGURE 26 

Replacing a 32-Gbps SFP+ optical transceiver in an upper port

1.

Pull tab

2.

Transceiver

4. Position a cable so that the key (the ridge on one side of the cable connector) is aligned with the slot in the transceiver. Insert the

cable into the transceiver until the latching mechanism clicks.

Cables are keyed so that they can be inserted in only one way. If a cable does not slide in easily, ensure that it is correctly
oriented.

Replacing an SFP+ transceiver

Brocade G630 Hardware Installation Guide

53-1005235-02

61

Содержание Brocade G630











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды