BCM95389/BCM95396
B r o a d c o m C o r p o r a t i o n
Page 8
Document
95389_95396-QS100-R
Setting Up a WebSmart™ Web-Based Connection
Connect both the client station and the BCM95389/BCM95396 reference
board to a common network. The BCM95389/BCM95396 reference board
connects via one of its network ports.
Figure 4: WebSmart Web-Based Connection
Note:
The BCM95389/BCM95396 reference board should have a
jumper connecting pins 2 and 3 on the J3 connector. This jumper should
be installed by default. If not, or if it has been changed, this jumper must
be replaced on pins 2 and 3 for the Web-based WebSmart software to
operate.
1.
Power-up the BCM95389/BCM95396 reference board.
2.
Open the Web browser software on the client system.
Switch RJ-45
Port
Client System
Network
Broadcom Switch
