BCM95389/BCM95396
Setting Up a WebSmart™ Console Connection
B r o a d c o m C o r p o r a t i o n
Document
95389_95396-QS100-R
Page 5
Configuring the HyperTerminal Utility
HyperTerminal is a Windows
®
utility program for serial communications.
To configure HyperTerminal, follow these steps:
1.
Start the HyperTerminal utility.
2.
Select the COM port to communicate with the BCM95389/BCM95396
demo target board.
3.
Set the serial port properties:
•
Bits per second: 19200 bps
•
Data bits: 8 bits
•
Parity: none
•
Stop bits: 1
•
Flow control: none
•
The properties window should look like the window below.
4.
Click
OK
.
