BCM95389/BCM95396
Setting Up a WebSmart™ Console Connection
B r o a d c o m C o r p o r a t i o n
Document
95389_95396-QS100-R
Page 7
9.
The BCM95389/BCM95396 WebSmart CLI prompts can be viewed by
typing
h
for Help Menu. Typing <enter> afterward is not necessary.
10.
The initial network setting can be viewed by typing
ng
. Typing <enter>
afterward is not necessary. The display appears as shown below:
11.
To customize these settings, type
ns
at the prompt. Typing <enter>
afterward is not necessary. Typing ns prompts asking if DHCP is preferred.
Type
y
for yes or
n
for no. If no is chosen, the next message shows the
existing IP address. This address can be modified by backspacing and typing
the new IP address. Type
<enter>
when finished. The same procedures
apply for changing the netmask and gateway. See the example below:
